- Sale!
Manufacturer
Enes Magnesy
Length
140 [mm]
Width
140 [mm]
Height
24 [mm]
Magnet type
Ferrite
Maximal hoisting capacity
40 [kg]
- air gap (a distance) between holding magnet and an backing plate (in some conditions even a very narrow gap, i.e. 0,5 [mm] can result in decrease in pull force by a half)
- material, of which a backing plate is made (the higher carbon proportion in steel, the smaller pull force)
- surface of a backing plate (the smoother the surface, the bigger pull force)
- direction of acting of detaching force (the biggest pull force is obtained with perpendicular acting of detaching force)
- thickness of a backing plate (the backing plate cannot be too thin, because in such case part of magnetic flux is not used for closing of a magnetic circuit)
- working temperature (in temperature of 80°[C] pull force can be lower of up to 20 per cent)
fixing details angle
45; 90; 135 [st.]
Maximum working temperature
250 [°C]
handling mode
ręczny
Number of axis to attach details
2
Weight
1,3 [g]
- air gap (a distance) between holding magnet and an attracted element
- material, of which an attracted element is made (the higher carbon proportion in steel, the smaller pull force)
- surface of an attracted element (the smoother the surface, bigger the pull force)
- direction of acting of detaching force (the biggest pull force is obtained with perpendicular acting of detaching force)
- thickness of an attracted element (the element cannot be too thin, because in such case part of magnetic flux is not used for closing of a magnetic circuit)
- working temperature.
Performance parameters
The pull force given refers to hoisting capacity measured in optimal conditions, by using as a backing plate a sheet made of low-carbon steel, 10 [mm] thick, of smooth surface and with the force acting perpendicularly, in room temperature.
Notice: the pull force given should be treated as only a comparative value. An actual pull force depends on the following factors:
The maximum pull force: ~40 [kg]
Holding magnet for welder is used to hold steel elements during welding works, keeping at the same time the angle of 30o, 45o, 60o, 90o, 135o, 150o. Highly regarded among welders, eliminate the need to hold a workpiece with hand, resulting in "two hands free". Additionally this holding magnet thanks to a relatively high pull force is ideal for securely hold both small and large and heavy elements. Aftert installing a snap-hook it also may be used to move small steel details from one place to another. The solid construction ensures long-term use.
In the holding magnet sintered ferrite magnets were used. The maximum working temperature for holding magnets involving ferrite magnets is 250oC.
The pull force given refers to hoisting capacity measured in optimal conditions, by using as a backing plate a sheet made of low-carbon steel, 30 [mm] thick, of smooth surface and with the force acting perpendicularly, in room temperature.
Notice: the pull force given should be treated as only a comparative value. An actual pull force depends on the following factors:
We generally recommend individual checking of the holding magnet in any specific working conditions.
Weight of the holding magnet: ~1,3 [kg]
The maximum pull force: ~40 [kg]
Holding magnet for welder is used to hold steel elements during welding works, keeping at the same time the angle of 30o, 45o, 60o, 90o, 135o, 150o. Highly regarded among welders, eliminate the need to hold a workpiece with hand, resulting in "two hands free". Additionally this holding magnet thanks to a relatively high pull force is ideal for securely hold both small and large and heavy elements. Aftert installing a snap-hook it also may be used to move small steel details from one place to another. The solid construction ensures long-term use.
In the holding magnet sintered ferrite magnets were used. The maximum working temperature for holding magnets involving ferrite magnets is 250oC.
The pull force given refers to hoisting capacity measured in optimal conditions, by using as a backing plate a sheet made of low-carbon steel, 30 [mm] thick, of smooth surface and with the force acting perpendicularly, in room temperature.
Notice: the pull force given should be treated as only a comparative value. An actual pull force depends on the following factors:
- air gap (a distance) between holding magnet and an attracted element
- material, of which an attracted element is made (the higher carbon proportion in steel, the smaller pull force)
- surface of an attracted element (the smoother the surface, bigger the pull force)
- direction of acting of detaching force (the biggest pull force is obtained with perpendicular acting of detaching force)
- thickness of an attracted element (the element cannot be too thin, because in such case part of magnetic flux is not used for closing of a magnetic circuit)
- working temperature.
We generally recommend individual checking of the holding magnet in any specific working conditions.
Weight of the holding magnet: ~1,3 [kg]
umspaw_r140x140x24f
1 Item
Specific References