Manufacturer
Enes Magnesy
Length
350 [mm]
* Magnetic section length
300 [mm]
Width
320 [mm]
Height
43 [mm]
Magnet type
Ferrite
Maximum working temperature
250 [°C]
Housing
stainless steel, AISI 304 / EN 1.4301, approved for contact with food
Przesypowy
yes
Range
max. 210 [mm]
with an easy cleaning
yes
Weight
28 [kg]
Performance parameters
The separator mounted above a belt conveyor flight is used for catching unwanted steel and iron elements from transported substances (food industry, processing of plastics, mineral raw materials, recycling, etc.). Mounted at a certain angle, it may be useful as well as a chute separator. Air-tight housing made of acid-proof steel contains a magnetic system assembled with ferrite magnets. It is a bottom surface of the separator which is magnetically active. The separator’s four corners are equipped with screwed apertures M8, where eyes used for suspension are screwed in.
The cleanout plate is made of acid-proof steel and soft aluminium, protecting surfacfe of the separator from damages caused by impacts of catched elements. Two strips of magnetic soft metal sheet built into the plate cause that to hold on to the separator and at the same time can be easily tear out with catched elements, thus streamlining the cleaning.
On commission we are ready to provide magnetic separators with dimensions chosen by Clients. Magnetic parameters, range of activity and dimensions are adjusted according to Client needs and expectations.
Magnetic field in the center of surface of the magnetic pole is ~0,092 [T].
Magnetic field in the center of surface between the magnetic poles is ~0,125 [T]. (0,001 T = 10 Gs)
Magnetic field in the center of surface between the magnetic poles at a distance of:
40 mm from the separator is ~0,071 [T],
80 mm from the separator is ~0,038 [T],
100 mm from the separator is ~0,027 [T],
120 mm from the separator is ~0,021 [T],
140 mm from the separator is ~0,016 [T],
As an example, range of catching for different caught objects: balls phi 5mm - approx. 60 mm, balls phi 12 mm - approx. 73 mm, screw caps M5-M10 - approx. 95 mm, iron nails (2 in.) - approx. 230 mm, iron nails (4 in.) - approx. 220 mm, iron nails (6 in.) - approx. 210 mm, flat spanner - approx. 160 mm.
In the magnetic separator sintered ferrite magnets were used. Max. working temperature for the magnetic separators with ferrite magnets is approx. 250°[C].
Caution! A careless handling can cause serious injury to hands !
Weight of separator is: ~ 25,0 [kg]
The separator mounted above a belt conveyor flight is used for catching unwanted steel and iron elements from transported substances (food industry, processing of plastics, mineral raw materials, recycling, etc.). Mounted at a certain angle, it may be useful as well as a chute separator. Air-tight housing made of acid-proof steel contains a magnetic system assembled with ferrite magnets. It is a bottom surface of the separator which is magnetically active. The separator’s four corners are equipped with screwed apertures M8, where eyes used for suspension are screwed in.
The cleanout plate is made of acid-proof steel and soft aluminium, protecting surfacfe of the separator from damages caused by impacts of catched elements. Two strips of magnetic soft metal sheet built into the plate cause that to hold on to the separator and at the same time can be easily tear out with catched elements, thus streamlining the cleaning.
On commission we are ready to provide magnetic separators with dimensions chosen by Clients. Magnetic parameters, range of activity and dimensions are adjusted according to Client needs and expectations.
Magnetic field in the center of surface of the magnetic pole is ~0,092 [T].
Magnetic field in the center of surface between the magnetic poles is ~0,125 [T]. (0,001 T = 10 Gs)
Magnetic field in the center of surface between the magnetic poles at a distance of:
40 mm from the separator is ~0,071 [T],
80 mm from the separator is ~0,038 [T],
100 mm from the separator is ~0,027 [T],
120 mm from the separator is ~0,021 [T],
140 mm from the separator is ~0,016 [T],
As an example, range of catching for different caught objects: balls phi 5mm - approx. 60 mm, balls phi 12 mm - approx. 73 mm, screw caps M5-M10 - approx. 95 mm, iron nails (2 in.) - approx. 230 mm, iron nails (4 in.) - approx. 220 mm, iron nails (6 in.) - approx. 210 mm, flat spanner - approx. 160 mm.
In the magnetic separator sintered ferrite magnets were used. Max. working temperature for the magnetic separators with ferrite magnets is approx. 250°[C].
Caution! A careless handling can cause serious injury to hands !
Weight of separator is: ~ 25,0 [kg]
smpl350x320x43fzplytaczy
5 Items
Specific References