External diameter
5 [mm] +0,1/-0,1
Height
18 [mm] +0,1/-0,1
magnetizing direction along dimension
18 [mm]
Grade
LNG12
Magnet type
AlNiCo
Maximal hoisting capacity
0,16 [kg]
Magnetic field in geometrical center of the magnetic pole surface
0,049 [T]
Maximum working temperature
450 [°C]
Magnetic moment
160,74 [nWb]x[m]
Weight
2,52 [g]
Performance parameters
Direction of magnetization along the height (the last dimension included in a magnet name) means that the surface of a magnet perpendicular to its height makes the N-pole, while the other surface perpendicular to the height refers to the S-pole;.
The pull force was measured by using metal sheet 10 [mm] thick, acting with perpendicular detaching force. With the force acting on the sliding off, the lifting capacity of the magnet will be 5 times smaller. The air gap comprised between the metal sheet and a magnet causes reduction in the pull force.
For flat magnets and magnets mounted in the open magnetic circuit working temperature may be insignificantly lower. For high magnets and magnets mounted in the closed magnetic circuit working temperature equals max. working temperature for a given material. Curie’s temperature is ~ 860°[C]. Temperature coefficient of remanence TK(Br): approx. -0,02 [%/°C]. Temperature coefficient of coercivity TK(HcJ): approx. +0,02 [%/°C].
AlNiCo Magnets may be used in water.
All the numbers quoted were obtained as a result of tests with one specific item in a room temperature and are intended to serve for comparison of practical magnetic properties of magnets offered by the shop.
Magnetic properties of material grade LNG12
remanence Br |
0,7 [T] |
coercivity HcJ |
min. 44[kA/m] |
energy product (BH)max |
12,4 [kJ/m3] |
| Magnetic properties of a particular material, together with its shape, volume, max. working temperature and direction of magnetization have influence on practical magnetic properties of a magnet. |
| These magnets are often used in guitar snap. |
Physical proprieties
density |
~7,3 [g/cm3] |