Holding magnet with facilitated separation 160x100x30 / N

The maximum pull force: ~800 [kg]
The maximum slide force: ~200 [kg]

Two threaded holes M8.
Length of handle: ~235 [mm].
Total width with handle: ~140 [mm].

Holding magnet with facilitated separation is used for secure of molds on vibro-tables during production of concrete elements.

In the holding magnet sintered neodymium magnets (NdFeB) were used. The maximum working temperature for holding magnets involving neodymium magnets is 80o[C].

The pull force given refers to hoisting capacity measured in optimal conditions, by using as a backing plate a sheet made of low-carbon steel, 10 [mm] thick, of smooth surface and with the force acting perpendicularly, in room temperature.

Notice: the pull force given should be treated as only a comparative value. An actual pull force depends on the following factors:

• air gap (a distance) between holding magnet and an attracted element
• material, of which an attracted element is made (the higher carbon proportion in steel, the smaller pull force)
• surface of an attracted element (the smoother the surface, bigger the pull force)
• direction of acting of detaching force (the biggest pull force is obtained with perpendicular acting of detaching force)
• thickness of an attracted element (the element cannot be too thin, because in such case part of magnetic flux is not used for closing of a magnetic circuit)
• working temperature.

We generally recommend individual checking of the holding magnet in any specific working conditions.

Weight of the holding magnet: ~4,7 [kg]