Manufacturer
Enes Magnesy
Length
505 [mm]
* Magnetic section length
700 [mm]
Width
730 [mm]
Height
150 [mm]
Magnet type
Ferrite
Maximum working temperature
250 [°C]
Housing
stainless steel, AISI 304 / EN 1.4301, approved for contact with food
Przesypowy
yes
Range
max. 390 [mm]
with an easy cleaning
yes
Weight
222 [kg]
Performance parameters
Separator mounted above a belt conveyor flight is used for catching unwanted steel and iron elements from transported substances (food industry, processing of plastics, mineral raw materials, recycling, etc.). Mounted at a certain angle, it may be useful as well as a chute separator. Air-tight housing made of acid-proof steel contains a magnetic system assembled with ferrite magnets. It is a bottom surface of the separator which is magnetically active. The separator are equipped with six screwed apertures M10, where eyes used for suspension are screwed in.
The cleanout plate is made of acid-proof steel and soft aluminium, protecting surfacfe of the separator from damages caused by impacts of catched elements. Two strips of magnetic soft metal sheet built into the plate cause that to hold on to the separator and at the same time can be easily tear out with catched elements, thus streamlining the cleaning.
On commission we are ready to provide magnetic separators with dimensions chosen by Clients. Magnetic parameters, range of activity and dimensions are adjusted according to Client needs and expectations.
Magnetic field in the center of surface of the magnetic pole is ~0,160 [T].
Magnetic field on the edge of surface of the magnetic pole (max.) is ~0,250 [T].
Magnetic field in the center of surface between the magnetic poles is ~0,135 [T].
Magnetic field in the center of surface between the magnetic poles at a distance of: 40 mm from the separator is ~0,131 [T], 80 mm from the separator is ~0,090 [T], 100 mm from the separator is ~0,075 [T], 120 mm from the separator is ~0,062 [T], 140 mm from the separator is ~0,053 [T], 160 mm from the separator is ~0,044 [T], 180 mm from the separator is ~0,037 [T] 200 mm from the separator is ~0,032 [T], 240 mm from the separator is ~0,023 [T], 280 mm from the separator is ~0,018 [T].
As an example, range of catching for different caught objects: screw caps M5-M10 - approx. 175 mm, iron nails - approx. 390 mm, paper clips - approx. 320 mm
In the magnetic separator sintered ferrite magnets were used. Max. working temperature for the magnetic separators with ferrite magnets is approx. 250°[C].
Caution! A careless handling can cause serious injury to hands!
Weight of separator is: ~ 250,0 [kg] + 7,0 [kg] cleanout plate.
Separator mounted above a belt conveyor flight is used for catching unwanted steel and iron elements from transported substances (food industry, processing of plastics, mineral raw materials, recycling, etc.). Mounted at a certain angle, it may be useful as well as a chute separator. Air-tight housing made of acid-proof steel contains a magnetic system assembled with ferrite magnets. It is a bottom surface of the separator which is magnetically active. The separator are equipped with six screwed apertures M10, where eyes used for suspension are screwed in.
The cleanout plate is made of acid-proof steel and soft aluminium, protecting surfacfe of the separator from damages caused by impacts of catched elements. Two strips of magnetic soft metal sheet built into the plate cause that to hold on to the separator and at the same time can be easily tear out with catched elements, thus streamlining the cleaning.
On commission we are ready to provide magnetic separators with dimensions chosen by Clients. Magnetic parameters, range of activity and dimensions are adjusted according to Client needs and expectations.
Magnetic field in the center of surface of the magnetic pole is ~0,160 [T].
Magnetic field on the edge of surface of the magnetic pole (max.) is ~0,250 [T].
Magnetic field in the center of surface between the magnetic poles is ~0,135 [T].
Magnetic field in the center of surface between the magnetic poles at a distance of: 40 mm from the separator is ~0,131 [T], 80 mm from the separator is ~0,090 [T], 100 mm from the separator is ~0,075 [T], 120 mm from the separator is ~0,062 [T], 140 mm from the separator is ~0,053 [T], 160 mm from the separator is ~0,044 [T], 180 mm from the separator is ~0,037 [T] 200 mm from the separator is ~0,032 [T], 240 mm from the separator is ~0,023 [T], 280 mm from the separator is ~0,018 [T].
As an example, range of catching for different caught objects: screw caps M5-M10 - approx. 175 mm, iron nails - approx. 390 mm, paper clips - approx. 320 mm
In the magnetic separator sintered ferrite magnets were used. Max. working temperature for the magnetic separators with ferrite magnets is approx. 250°[C].
Caution! A careless handling can cause serious injury to hands!
Weight of separator is: ~ 250,0 [kg] + 7,0 [kg] cleanout plate.
SMPL505X730X150F
1 Item
Specific References