- Out-of-Stock
Manufacturer
Enes Magnesy
Length
320 [mm]
Width
320 [mm]
Height
355 [mm]
Magnet type
Neodymium
Maximum magnetic field over the middle poles
0,69 [T]
Flow surface
584 [cm2]
Number of magnetic bars
Maximum working temperature
≤ 80 [°C]
Housing
stainless steel, AISI 304 / EN 1.4301, approved for contact with food
handling mode
manual use
two-level
yes
Przesypowy
yes
with an easy cleaning
yes
Weight
30 [kg]
Performance parameters
Separation magnetic drawers are used for catching magnetically soft elements (iron filings, bolts, etc.) from loose materials (e.g. powders, granulated products, grains etc.). They may be of use in food industry (as a version closed in acid-proof steel H18N9(1.4301)(304) and 1H18N9T(1.4541)(321) housing), as well as in plastics processing, ceramic an many other branches of industry.
Built-in magnetic grate made of acid-proof steel contains a magnetic system assembled with neodymium magnets. It is a surface of the seven incorporated into the separator magnetic filter bars of 32 mm in diameter which is magnetically active. Catched magnetically soft elements falls self-moving off after pushing the magnetic grate out of the box and senquentially pushing magnetic active parts out of protection tubes (see enclosure).
On commission we are ready to provide magnetic separators with dimensions chosen by Clients. Magnetic parameters, range of activity and dimensions are adjusted according to Client needs and expectations.
Magnetic field in the center of surface of pole of the magnetic filter bar is ~0,690 [T].
In the magnetic grate sintered neodymium magnets were used. Max. working temperature for the magnetic grates with neodymium magnets is approx. 80°[C].
Weight of grate is: ~32,5 [kg]
Separation magnetic drawers are used for catching magnetically soft elements (iron filings, bolts, etc.) from loose materials (e.g. powders, granulated products, grains etc.). They may be of use in food industry (as a version closed in acid-proof steel H18N9(1.4301)(304) and 1H18N9T(1.4541)(321) housing), as well as in plastics processing, ceramic an many other branches of industry.
Built-in magnetic grate made of acid-proof steel contains a magnetic system assembled with neodymium magnets. It is a surface of the seven incorporated into the separator magnetic filter bars of 32 mm in diameter which is magnetically active. Catched magnetically soft elements falls self-moving off after pushing the magnetic grate out of the box and senquentially pushing magnetic active parts out of protection tubes (see enclosure).
On commission we are ready to provide magnetic separators with dimensions chosen by Clients. Magnetic parameters, range of activity and dimensions are adjusted according to Client needs and expectations.
Magnetic field in the center of surface of pole of the magnetic filter bar is ~0,690 [T].
In the magnetic grate sintered neodymium magnets were used. Max. working temperature for the magnetic grates with neodymium magnets is approx. 80°[C].
Weight of grate is: ~32,5 [kg]
SMSZ320X320X355N
Specific References