Width
50 [mm]
Height
3 [mm]
magnetizing direction along dimension
3 [mm]
Magnet type
Ferrite
Maximum working temperature
≤ 80 [°C]
Weight
570 [g]
Performance parameters
All the numbers quoted were obtained as a result of tests with one specific item in a room temperature and are intended to serve for comparison of practical magnetic properties of magnets offered by the shop.
Magnetic properties of material grade
remanence Br |
0,225 [T] |
coercivity HcB |
min. 150 [kA/m] |
coercivity HcJ |
min. 180 [kA/m] |
energy product (BH)max |
min. 11,0 [kJ/m3] |
| As an example you will find attached a graph of a course of II quadrant of magnetic hysteresis loop for a bonded ferrite material grade. |
Physical proprieties
density |
~3,8 [g/cm3] |
Minimal length of the stripe available for purchase is 1 meter = 1 unit.
In the magnetic stripe as a magnetically active substance barium ferrite was used. The stripe with bipole magnetization, as opposed to the stripe multipole magnetized, is characterized by smaller detachment force. After rolling it makes a ring with one magnetic pole inside, and the other – outside of the ring. It proves to be useful in cooperation with both reed switches and hall effect sensors.
Magnetic properties of material grade: remanence Br min. 0,225 [T], coercivity HcB min. 150 [kA/m], coercivity HcJ min. 180 [kA/m], energy product (BH)max min. 11,0 [kJ/m3]
Physical proprieties: density ~3,8 [g/cm3]
Max. working temperature is approx. 80°[C].
Direction of magnetization: along the height (bipolar) means that one side of the stripe corresponds with the N-pole, while the other – with the S-pole.
Weight of 1 running meter of the stripe is: ~570 [g] , Weight of one roll (25 running meters) is: ~14,3 [kg].
As an example you will find attached a graph of a course of II quadrant of magnetic hysteresis loop for a bonded ferrite material grade.
TASMAM50X3DWU
90 Items
Specific References