Manufacturer
Enes Magnesy
Length
850 [mm]
* Magnetic section length
800 [mm]
Width
60 [mm]
Height
40 [mm]
Thread type
internal
Thread length
10 [mm]
M10
Magnet type
Neodymium
Maximum working temperature
≤ 60 [°C]
Housing
stainless steel, AISI 304 / EN 1.4301, approved for contact with food
Waterproof
class IP67
Przesypowy
yes
Range
max. 120 [mm]
Weight
13.4 [kg]
Performance parameters
A magnetic beam mounted above a belt conveyor is used for catching of undesirable steel or iron elements from transported substances (food industry, processing of plastics, mineral raw materials, recycling, etc.). Mounted at a angle, can also be used as a chute separator. Watertight housing made of acid-proof steel OH18N9 (1.4301),(304) contains a magnetic circuit with neodymium magnets. It is a bottom surface of the beam which is magnetic active. The beam’s both ends are equipped with two threaded apertures M10 (spaced 38 mm) for mounting.
On commission we are ready to provide magnetic separators with dimensions chosen by Clients. Magnetic parameters, range of activity and dimensions are adjusted according to Client needs and expectations.
Magnetic field in the center of surface between the magnetic poles (maximum) is ~0,86 [T] = 8600 [Gs].
As an example, range of catching for different caught objects: balls Ø5-10 - approx.70 mm, screw caps M5-M10 - approx.80 mm, flat spanner - approx.100 mm, iron nails 2''-3,5'' - approx.120mm.
In the magnetic beam sintered neodymium magnets were used. The maximal working temperature for the magnetic separators with neodymium magnets is approx. 60°[C].
Weigh: ~13,4 [kg]
Caution! A careless handling can cause serious injury to hands !
A magnetic beam mounted above a belt conveyor is used for catching of undesirable steel or iron elements from transported substances (food industry, processing of plastics, mineral raw materials, recycling, etc.). Mounted at a angle, can also be used as a chute separator. Watertight housing made of acid-proof steel OH18N9 (1.4301),(304) contains a magnetic circuit with neodymium magnets. It is a bottom surface of the beam which is magnetic active. The beam’s both ends are equipped with two threaded apertures M10 (spaced 38 mm) for mounting.
On commission we are ready to provide magnetic separators with dimensions chosen by Clients. Magnetic parameters, range of activity and dimensions are adjusted according to Client needs and expectations.
Magnetic field in the center of surface between the magnetic poles (maximum) is ~0,86 [T] = 8600 [Gs].
As an example, range of catching for different caught objects: balls Ø5-10 - approx.70 mm, screw caps M5-M10 - approx.80 mm, flat spanner - approx.100 mm, iron nails 2''-3,5'' - approx.120mm.
In the magnetic beam sintered neodymium magnets were used. The maximal working temperature for the magnetic separators with neodymium magnets is approx. 60°[C].
Weigh: ~13,4 [kg]
Caution! A careless handling can cause serious injury to hands !
BMWSZ850X60X40N52
4 Items
Specific References