- Out-of-Stock
Manufacturer
Enes Magnesy
Length
450 [mm]
* Magnetic section length
600 [mm]
Width
620 [mm]
Height
126 [mm]
Magnet type
Neodymium
Maximum working temperature
≤ 80 [°C]
Housing
stainless steel, AISI 304 / EN 1.4301, approved for contact with food
Przesypowy
yes
Range
max. 300 [mm]
with an easy cleaning
yes
Weight
270 [kg]
Performance parameters
Separator mounted above a belt conveyor flight is used for catching unwanted steel and iron elements from transported substances (food industry, processing of plastics, mineral raw materials, recycling, etc.). Mounted at a certain angle, it may be useful as well as a chute separator. Air-tight housing made of acid-proof steel contains a magnetic system assembled with neodymium magnets. It is a bottom surface of the separator which is magnetically active. Direction of tape feed is along the dimension 450 mm. The separator's top are equipped with four screwed apertures M12, where eyes used for suspension are screwed in. The two separator's longer side-faces are equipped with two screwed apertures M10 with two eyes, where eyes used for suspension during montage on worksite or cleaning are screwed in.
The cleanout plate is made of acid-proof steel and soft aluminium, protecting surfacfe of the separator from damages caused by impacts of catched elements. Two strips of magnetic soft metal sheet built into the plate cause that to hold on to the separator and at the same time can be easily tear out with catched elements, thus streamlining the cleaning.
On commission we are ready to provide magnetic separators with dimensions chosen by Clients. Magnetic parameters, range of activity and dimensions are adjusted according to Client needs and expectations. Such type of magnetic separator we assemble by rule no longer than 14 days after placing an order.
Magnetic field in the center of surface of the magnetic pole is ~0,270 [T].
Magnetic field in the center of surface between the magnetic poles is ~0,560 [T].
Magnetic field in the center of surface between the magnetic poles at a distance of:
20 mm from the separator is ~0,295 [T],
40 mm from the separator is ~0,189 [T],
80 mm from the separator is ~0,103 [T],
120 mm from the separator is ~0,064 [T],
160 mm from the separator is ~0,042 [T],
200 mm from the separator is ~0,029 [T],
240 mm from the separator is ~0,020 [T].
As an example, range of catching for different caught objects: screw caps M5-M10 - approx. 175 mm, hammers 0,7kg-2kg - approx. 200 mm, flat spanners - approx. 300 mm, iron nails (2-6 inch.) - approx. 300 mm.
In the magnetic separator sintered NdFeB magnets were used. Max. working temperature for the magnetic separators with NdFeB magnets is approx. 80°[C].
Caution! A careless handling can cause serious injury to hands !
Weight of separator is: ~ 260,0 [kg]
Separator mounted above a belt conveyor flight is used for catching unwanted steel and iron elements from transported substances (food industry, processing of plastics, mineral raw materials, recycling, etc.). Mounted at a certain angle, it may be useful as well as a chute separator. Air-tight housing made of acid-proof steel contains a magnetic system assembled with neodymium magnets. It is a bottom surface of the separator which is magnetically active. Direction of tape feed is along the dimension 450 mm. The separator's top are equipped with four screwed apertures M12, where eyes used for suspension are screwed in. The two separator's longer side-faces are equipped with two screwed apertures M10 with two eyes, where eyes used for suspension during montage on worksite or cleaning are screwed in.
The cleanout plate is made of acid-proof steel and soft aluminium, protecting surfacfe of the separator from damages caused by impacts of catched elements. Two strips of magnetic soft metal sheet built into the plate cause that to hold on to the separator and at the same time can be easily tear out with catched elements, thus streamlining the cleaning.
On commission we are ready to provide magnetic separators with dimensions chosen by Clients. Magnetic parameters, range of activity and dimensions are adjusted according to Client needs and expectations. Such type of magnetic separator we assemble by rule no longer than 14 days after placing an order.
Magnetic field in the center of surface of the magnetic pole is ~0,270 [T].
Magnetic field in the center of surface between the magnetic poles is ~0,560 [T].
Magnetic field in the center of surface between the magnetic poles at a distance of:
20 mm from the separator is ~0,295 [T],
40 mm from the separator is ~0,189 [T],
80 mm from the separator is ~0,103 [T],
120 mm from the separator is ~0,064 [T],
160 mm from the separator is ~0,042 [T],
200 mm from the separator is ~0,029 [T],
240 mm from the separator is ~0,020 [T].
As an example, range of catching for different caught objects: screw caps M5-M10 - approx. 175 mm, hammers 0,7kg-2kg - approx. 200 mm, flat spanners - approx. 300 mm, iron nails (2-6 inch.) - approx. 300 mm.
In the magnetic separator sintered NdFeB magnets were used. Max. working temperature for the magnetic separators with NdFeB magnets is approx. 80°[C].
Caution! A careless handling can cause serious injury to hands !
Weight of separator is: ~ 260,0 [kg]
smpl450x620x126n
Specific References