External diameter
12 [mm] +0,1/-0,1
Height
2 [mm] +0,1/-0,1
magnetizing direction along dimension
2
Grade
N38
Magnet type
Neodymium
Maximal hoisting capacity
1,36 [kg]
Magnetic field in geometrical center of the magnetic pole surface
0,18 [T]
Coating
NiCuNi with foam 3M 4920
Maximum working temperature
≤ 80 [°C]
adhesive
yes
Weight
1,7 [g]
Performance parameters
Direction of magnetization along the height means that one circular surface of a magnet makes the N-pole, while the other – opposite – circular surface refers to the S-pole.
The pull force was measured by using metal sheet 10 [mm] thick, acting with perpendicular detaching force. With the force acting on the sliding off, the lifting capacity of the magnet will be 5 times smaller. The air gap comprised between the metal sheet and a magnet causes reduction in the pull force.
do not use in water
Sintered neodymium magnets are brittle (fragile). A neodymium magnet without housing could break after an impact with another strong magnet.
For flat magnets and magnets mounted in the open magnetic circuit working temperature may be insignificantly lower. For high magnets and magnets mounted in the closed magnetic circuit working temperature equals max. working temperature for a given material. Curie’s temperature is ~ 310°[C]. Temperature coefficient of remanence TK(Br: approx. ~0,12 %/°[C]. Temperature coefficient of coercivity TK(HcJ): approx. -0,6 %/°[C].
All the numbers quoted were obtained as a result of tests with one specific item in a room temperature and are intended to serve for comparison of practical magnetic properties of magnets offered by the shop.
Physical properties
Density |
~7,5 [g/cm3] |
Vickers’ hardness (HV) |
~600 [kg/mm2] |
Resistivity |
~144 [uOhm x cm] |
D12 x 2 / N38 - NdFeB (neodymium) magnet / self-adhesive, with foam 3M 4920
MW12X2N38_3M4920
23446 Items
Specific References
New