External diameter
20 [mm] +0,1/-0,1
Aperture diameter for head of a screw
7 [mm] +0,1/-0,1
Internal diameter
3,5 [mm] +0,1/-0,1
Height
3 [mm] +0,1/-0,1
magnetizing direction along dimension
3
Grade
N38
Magnet type
Neodymium
Maximal hoisting capacity
3,65 [kg]
Coating
Nickel (NiCuNi)
Maximum working temperature
≤ 80 [°C]
Performance parameters
Direction of magnetization along the height means that one circular surface of a magnet makes the N-pole, while the other – opposite – circular surface refers to the S-pole.
The pull force was measured by using metal sheet 10 [mm] thick, acting with perpendicular detaching force. With the force acting on the sliding off, the lifting capacity of the magnet will be 5 times smaller. The air gap comprised between the metal sheet and a magnet causes reduction in the pull force.
For flat magnets and magnets mounted in the open magnetic circuit working temperature may be insignificantly lower. For high magnets and magnets mounted in the closed magnetic circuit working temperature equals max. working temperature for a given material. Curie’s temperature is ~ 310°[C]. Temperature coefficient of remanence TK(Br: approx. ~0,12 %/°[C]. Temperature coefficient of coercivity TK(HcJ): approx. -0,6 %/°[C].
All the numbers quoted were obtained as a result of tests with one specific item in a room temperature and are intended to serve for comparison of practical magnetic properties of magnets offered by the shop.
Physical properties
Density |
~7,5 [g/cm3] |
Vickers’ hardness (HV) |
~600 [kg/mm2] |
Resistivity |
~144 [uOhm x cm] |
D20 x d7/3,5 x 3 / N38 - NdFeb (Neodymium) Magnet
MP20X7/3,5X3/N38
61491 Items
Specific References
New